Tub would not empty-FL indication on LCD Panel

ApplianceWhirlpool Washer

ModelCalypso

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver

J.Richard From Chatham, MA

Nov 03, 2010

5 out of 5 people found this instruction helpful

Unplugged washer from AC. Tipped washer back at about 30degrees and stabilized it (only part of job that was concerning). Removed bottom panel by removing 3 Hex Head Sheet metal screws. Disconnected white and black hoses from pump. Removed three Hex Head Machine bolts holding pump in place. Reached in and disconnected electrical connector.

Installation was the reverse.

Pump failed because capacitor failed (this was a replacement pump that was about 3 years old--first pump failed when plastic drive broke. Replacement is now metal.

This washer should have been designed with some filtration of the recirculating water, but was not (even though the literature indicates recirculating water is filtered.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Motor and Drain Pump Assembly

Part Number: PS970123

$141.59
In Stock