Lid switch had broken and was kept open so that washer would run thru all cycles even with lid open. This created a safety problem.

ApplianceKenmore Washer

Model110.27822790

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Howard From Norridgewock, ME

Nov 02, 2010

1 out of 2 people found this instruction helpful

Remove both plastic end caps on control assbly. remove 2 screws holding control assbly. Lift washer casing up and away form washer frame. Remove lid switch harness from washer by lifting the plastic clip up.Remove lid switch wiring harness after removing 2 screws holding switch to washer. Place new switch into hole by squeezing together. Connect wiring from control assbly into new switch receptacle. Attach wiring to clips on side of frame and install switch waser casing with the 2 screws. place washer casing back onto frame and line up with rear panel. make sure sides line up with back. Install 2 screws to secure top control assbly. Replace end caps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly

Part Number: PS350431

$27.18
In Stock