noisy and slow drum speed

ApplianceWhirlpool Dryer

ModelWGD6400SW0

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Wrench set
Pliers
Nutdriver
Screw drivers

Jeff From Phoenix, AZ

Oct 31, 2010

13 out of 24 people found this instruction helpful

1. disconnect power,gas and vent lines
2. pop off top of unit
3. remove front of dryer
4. lay unit on its back
5. remove drum and replace pulley assembly,belt,drum rollers of which it has 2 rear and 2 front
6. reverse above and then remove filter-vent housing and scrape off old seal install new seal
7. re-connect power,gas and vent use again
8. only sad part to whole job was seeing how cheaply whirlpool now makes thier products

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

SEAL

Part Number: PS1487703

$26.52
In Stock

Belt, Drive

Part Number: PS1487713

$32.80
In Stock

Idler Pulley Arm with Wheel

Part Number: PS1487714

$21.93
In Stock

Heavy-Duty Drum Support Roller Kit (Now subbed to Drum Support Roller)

Part Number: PS3494614

$11.93
In Stock