Level of DifficultyEasy
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
29 out of 32 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line is not long enough to make it out of your wall space. Or of your oven is attached well to the frame.
Were these instructions helpful?
Part Number: PS974727