belt tensioner pulley seized to shaft

ApplianceMaytag Dryer

Model

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Wrench set
Nutdriver
Screw drivers

Shane From Heber City, UT

Nov 04, 2007

2 out of 2 people found this instruction helpful

At first I thought I could just replace the pulley, but on closer inspection I found that the pulley had become seized on the shaft. I ended up removing the entire bracket (which I should have purchased also) and cutting the shaft off. I manufactured a new shaft from a bolt of the appropriate size and tack welded it to the bracket. It took a little more time than I anticipated. My advice to anyone doing this would be to spend a little extra money and buy the entire bracket and pulley. That would make this about a 15 minute job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Idler Pulley Wheel and Bearing (Now subbed to Idler Pulley Wheel and Bearing)

Part Number: PS2347262

$9.55
In Stock