Dryer no longer produced heat, otherwise fine.

ApplianceMaytag Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

William From Walden, NY

Nov 04, 2007

9 out of 9 people found this instruction helpful

Removed front of dryer, heater element now exposed. Held in by 2 screws, had electrical wires attached with spade clips. Unhooked the wires, took the screws out, old element came out easily. Had to remove the high temperature reostat which is held on the side of the heating unit by 2 screws. Needed this for the new unit. Simply reversed the steps above to install the new unit, replaced the front panel and the dryer was ready. Took a bit over an hour total.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Heating Element (Now subbed to Complete Heater and Housing Assembly - 240V)

Part Number: PS2200246

In Stock