LCD WENT OUT ON CONTROL PANEL

ApplianceSharp Microwave

ModelR-1502

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

David From Whitewater, WI

Oct 03, 2010

4 out of 4 people found this instruction helpful

STEP 1. REMOVE 3 SCREWS HOLDING ABOVE VENT.
STEP 2. REMOVE SINGLE SCREW HOLDING RIGHT SIDE PANEL.
STEP 3. UNPLUG UNIT
STEP 4. LOWER PANEL. WILL REST ON LOWER PEGS AND WIRES.
STEP 5. UNPLUG CONTROL PANEL ASSEMBLY. 5 PLUGS. REMEMBER
LOCATION OF EACH TO REPLACE WHEN FINISHED.
STEP 6. REMOVE ENTIRE PANEL CAREFULLY NOT TO BREAK OFF
PLASTIC TEETS HOLDING PANEL IN PLACE.
STEP 7. UNSCREW 4 SCREWS WHITH PHILLIPS SCREWDRIVER HOLDING
PANEL ASSEMBLY IN PLACE REMEMBERING HOW IT GOES.
STEP 8. UNFASTEN/PLUG LCD PORTION FROM CONTROL PANEL
ASSEMBLY.
STEP 9. SNAP OUT LCD GLASS PANEL AND REMOVE ENTIRE UNIT.
STEP 10.REVERSE EACH STEP IN ORDER.

BE PREPARED TO TAKE YOUR TIME AND HANDLE GENTLY WITH CARE!
ITS NOT VERY DIFFICULT IF YOU TAKE YOUR TIME, WRITE DOWN STEPS AND DRAW DIAGRAMS IF NECESSARY. YOU CAN SAVE ALOT OF MONEY BY DOING IT YOURSELF!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

CONTROL PANEL ASSEMB

Part Number: PS2409467

$114.45
In Stock