Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of Appliance5 - 10 years
Harry C From Canonsburg, PA
Nov 03, 2007
1 out of 1 people found this instruction helpful
1) Remove agitator cap & seal assembly.
2) Remove agitator mounting bolt. (You will need socket and extension to reach bolt)
3) Remove augger by pulling up.
4) Replace agitator cam and dogs per picture in the supplied instructions.
) Apply small amount of silicon grease to thrust washer and reassemble in reverse order. Use a little silicon grease on the new rubber cap seal ring..
|Part Photo||Part Description||Price||Availability
Part Number: PS334650