UNIT WOULDN'T WORK. "CLEAN" LIGHT BLINKING

ApplianceWhirlpool Dishwasher

ModelGU2400XTPS6

Level of DifficultyReally easy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

PAUL From ESTES PARK, CO

Sep 20, 2010

30 out of 39 people found this instruction helpful

The unit had power, but the controls would not work. The "Clean" light was blinking. I first replaced the control unit, no help. I then used the "Just Ask" and was told the problem was the heating element and/or the Hi-Temp thermostat. I replaced both those and used the re-set code pushing the "Hi-Temp/Air Dry, Hi-Temp/Air Dry" buttons. That did it. Easy parts to locate and replace. It took longer pulling the unit out and putting it back than it did to replace the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

High Limit Thermostat

Part Number: PS382429

$17.67
In Stock

Rubber Washer

Part Number: PS384970

$3.96
In Stock

Heating Element Nut

Part Number: PS392966

$4.16
In Stock

Heater Element (Now subbed to Heating Element)

Part Number: PS8260087

$36.72
In Stock