Drum stopped turning

ApplianceWhirlpool Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Wes From Duluth, MN

Aug 16, 2010

1 out of 2 people found this instruction helpful

I pretty much followed the instruction sheet that was included with the new drum belt BUT, this should be added in step #2. "If working alone" Before removing the front door panel: A)pull down lower access panel. B)Support the weight of the drum. (This can prevent damaging the rear drum seal!).
Also, instruction sheet step #5 should read: Route belt through the idler pulley bracket (by pulling side of bracket open enough to insert belt) and then around the motor pulley.
Step #7) A putty knife with the end rounded off works best!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

In Stock

Drum Support Rollers

Part Number: PS347627

In Stock