center element of triple burner was not working.

ApplianceJenn-Air Range

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Pete From Longwood, FL

Aug 12, 2010

5 out of 6 people found this instruction helpful

I pulled the unit out from the wall. Took the screws out along the sides. Removed screw holding the front controls loose. First I changed the control switch which was very easy. Two screws and a couple of wires. The burner was a bit more tricky. I had propped the glass cook top up so I would not have to disconnect to many wires. Took out the screws holding the burner in place and disconnected the wires. I removed the clips from the old burner and attatched them to the new burner, then reinstalled the new burner. The only real problem was the wires. I forgot the order of a couple of them. I was able to check on line and get the correct order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

SWITCH- RO

Part Number: PS2086186

$31.18
In Stock

Triple Element

Part Number: PS2087536

$167.36
In Stock

Infinite Switch - 8"

Part Number: PS2088168

$43.91
In Stock