Level of DifficultyA Bit Difficult
Time to do repair15 - 30 mins
Age of ApplianceMore than 10 years
Alan From Jonesboro, IL
Oct 31, 2007
31 out of 32 people found this instruction helpful
My first diagnosis was that the leak was originating from a worn door seal. The door seal was replaced, but did not correct the problem. The spray bars were inspected for cracks or splits and were found to be sound. I removed the interior cover of the door and traced the water leak back to the dispenser door latch seal. The latch grommet was replaced and the problem was corrected. In order to replace the grommet, the interior door cover screws were removed using a star bit screw driver. Once the door cover was separated from the door, the small motor that operates the door latch mechanism needs to be unclipped from the door cover (leave the wiring harness connected). Use a nut driver with a 1/4" socket to remove the latch mechanism (2 screws). Slide the old rubber grommet over the latch, and install the new rubber grommet. Reassemble the latch mechanism, reversing the previous steps. Done.