Washer stopped running, wouldn't drain.

ApplianceWhirlpool Washer

ModelLSN1000JQ1

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Eric From Tomball, TX

Aug 10, 2010

0 out of 1 people found this instruction helpful

Washer shopped and wouldn't drain, so we started testing. Figured out how to bypass the door switch, and washer started working again. So we knew we needed a door switch. During testing, we also noticed the agitator cogs were worn out too. Probably had been for months, but we wouldn't have noticed. So we ordered switch and cogs. Cogs were super easy, took about 15 minutes, including referring back to diagrams. Switch required removing the cabinet cover, replacing the switch, then putting the cabinet cover back on. Getting the cover back on was the hard part. That is, until I realized it had to be tilted forward first, fit at the front/bottom, then rotated back into place. After that it fit perfectly and washer now works like new again. Saved a LOT of money versus calling a repair service. Very happy! :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock

Agitator Directional Cogs

Part Number: PS388034

$3.32
In Stock