noise while spinning

ApplianceAmana Washer

ModelLWA50aw

Level of DifficultyVery Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

Bruce From Harrison, OH

Aug 05, 2010

1 out of 3 people found this instruction helpful

had to completely disasemble whole washer drum and mechanical components to remove upper bearing on transmission,the drum hub was corroded on the shaft. I had to use a gear puller and a propane torch to get the hub off upper shaft of the transmission. then press the bearings in the respective sheet metal supports. reassembly was alot easier than taking it apart. Not a job for an average homeowner. It would not have been repaired without the wheel puller. all the seals were reusable A week and a half of use later no leaks and works great

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Upper/Lower Bearing

Part Number: PS2040734

$27.02
In Stock