Dispenser flap for ice not closing. no water from dispenser was coming out.

ApplianceGeneral Electric Refrigerator

ModelZFSB23DNDSS

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Bart From Whitestone, NY

Jul 30, 2010

1 out of 4 people found this instruction helpful

Water line 5/16inch was severed, under refrigerator. Used union connector to join line. Dispenser plate removed using allen key to unsnap plate ,from under the plate itself. Removed screws holding solenoid valve and removed the plug from circuit board connected to solenoid. Installed new solenoid valve. Put flapper back in place, and made sure spring on left side of flapper is reattached to the opening on the flapper. This corrected all problems. Caution, keep an eye on spring that it remains in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Union Connector - 5/16" to 5/16"

Part Number: PS758446

$3.62
In Stock

Recess Grille

Part Number: PS964306

$7.48
In Stock

Dispenser Door Solenoid Assembly

Part Number: PS1483583

$31.30
In Stock