While filling the tub, water was also spraing onto the floor under the washer.

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Jody From Westborough, MA

Jul 15, 2010

0 out of 1 people found this instruction helpful

Unscrewed 2 screws at bottom front of washer. Took front panel off of washer. Undid 2 bolts from the underside of top of washer. Lifted washer top back and started a cycle. Saw the water spraying out of part of a hose assembly. Seemed like it was some assembly to mix the soap into the water if you had a slot to pour soap into, this washer didn't have that on the external parts but it had the internal parts for it. Loosened a metal strap from one end o fthe assembly that leaked, removed it, the leaking piece of rubber came out with it. Looked up parts on this site and found a picture which made me realize the leaking part could be pulled out of the tube it was in, confirmed it looked identical so i ordered it. Once it arrived I was able to place a plastic piece inside the new one, re-insert it in the end of the house i had removed, insert that all back into the assembly and re-tighten the hose clamp. Briefly turned it on to confirm it was not leaking anywhere else, then closed it all back up. I've done several loads since with no issues.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Rubber Injector Valve

Part Number: PS2019175

In Stock