Timer would not run end spin after rinse cycle.

ApplianceAmana Washer

ModelLW4303

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Dan From Blue Grass, IA

Jul 08, 2010

1 out of 2 people found this instruction helpful

Unplug the washer from the outlet. Remove two screws holding top of control panel and remove. Fold control panel forward as far as it will go, but don't force it. Remove 4 screws holding back panel down to washer, this gives adequate space to access the timer. Unscrew the knob from the front counterclockwise. Pull timer faceplate located under the knob straight off gently. Remove the two screws, (one on top, one on bottom), holding the timer to the control panel. Pull it out far enough to get a firm grip on the wire lead and disconnect it from the timer. Install the new timer unit in reverse procedure. When reinstalling the timer faceplate, notice that it only fits on one way. Look for, and match up the flat edges as you push it on. Be sure to rotate the timer to the top position before plugging it back in. For most of the work I used a phillips head screwdriver, flat head screwdriver, 1/4 in socket with a 1/4 in drive and extension. I am pleased with the operation and price of this timer unit!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer - 4 Cycle

Part Number: PS2038665

No Longer Available