Grill was cracked and Filter was wearing Out

ApplianceGeneral Electric Microwave

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Scott From Mercerville, NJ

Jul 07, 2010

33 out of 49 people found this instruction helpful

First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely.

Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Vent Grille

Part Number: PS752092

$95.68
In Stock

Grease Filter

Part Number: PS952418

$36.67
In Stock