Washer would not drain on any cycle

ApplianceGeneral Electric Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

john From milford, PA

Jun 30, 2010

2 out of 3 people found this instruction helpful

Use flat head screw driver to push in clips that hold on front panel.
use plyers to remove hose clamps on motor and remove hoses.
use nut driver and remove two screws holding bracket in place. disconnect two wire plugs.
Install motor and work above in reverse.
very simple 15min job at most.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pump and Motor Assembly (Now subbed to Drain Pump and Motor Assembly)

Part Number: PS8768445

In Stock