Broken bracket would not dispense water

ApplianceWhirlpool Refrigerator


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Thomas From Cataula, GA

Jun 29, 2010

2 out of 3 people found this instruction helpful

First I removed the face plate from the dispenser, then removed two screws holding the bracket in place. All of the wiring was held in place and I did not have to remove any of the switches from the wires. I then removed the stationary switch from the ice side and removed the entire bracket. I then put the new bracket in place and installed the switches and wiring harness. It took less than 10 minutes to install.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Bracket

Part Number: PS327360

In Stock