Hose had developed a slit in the seam nearest to the tub and was pouring out the water flooding the basement where the washer is located.

ApplianceHotpoint Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Jack From Hazard, KY

Jun 19, 2010

0 out of 1 people found this instruction helpful

Lay the drain pipe lower than the tub to remove any excess water in the tub and lines. Loosened clamp on the tub side with a screwdriver then removed hose from the tub. I used pliers to pinch clamp and remove hose from pump. To install hose put clamps on hose then mount to the pump and the tub then tighten clamps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pump to Tub Inlet Drain Hose

Part Number: PS2322462

$5.13
In Stock