Cook tray would not rotate.

ApplianceGeneral Electric Microwave

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Jeff From Front Royal, VA

Jun 19, 2010

0 out of 1 people found this instruction helpful

STEP 1: Remove screws from bottom of microwave assembly where lights and filters are located.
STEP 2: Bottom cover is hinged at back side so swings down from front, exposing drive motor which is mounted in center bottom with (2) screws and has (1) electrical connector with (2) wires. STEP 3: Disconnect wire connector and remove mounting screws, allowing motor to be removed.
STEP 4: Install replacement motor in reverse order of removal steps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Motor

Part Number: PS237772

$44.62
In Stock