water level would'nt empty to allow spin cycle

ApplianceGeneral Electric Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Tammy From Belle, WV

Jun 15, 2010

0 out of 1 people found this instruction helpful

with a blade screw driver, I released the clips holding the front cover (from the top cover) tip the panel foward and lift off of pins on bottom. I put some towels in the bottom to absorb any water left after removing all I could with a cup. Then I released both clamps with pliers, pushing them back on hoses. Using a 10 mm nut driver, I removed the pump. I then mounted the new pump, pushed hoses on and slid clamps in position with pliers(while squeezing pliers) Voila, it works like it's new. Thank you Parts Select

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pump and Motor Assembly (Now subbed to PUMP)

Part Number: PS8768445

$53.39
In Stock