The timer was noisy, indicating gear wear.

ApplianceMaytag Washer

ModelPAV2300AWW

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Socket set

John From Leesburg, VA

Jun 15, 2010

2 out of 3 people found this instruction helpful

I removed the three screws on the top of the control panel and the three screws on the rear shield. This exposed the timer.

Through a hole in the back of the timer, using needle nose pliers, I pulled out the spline securing the timer knob, thereby releasing the timer knob. This is the key to the whole process, because the Maytag manual says that turning the timer knob counterclockwise will release it. That is wrong.

Then I disconected the electrical connector on the timer, and removed the retaining screw on the timer. Next, I pulled the timer out of its snap fit and replaced it. Reversing the steps in described, I replaced the timer and snapped the timer knob on the spline, completing the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer

Part Number: PS2017900

$125.05
In Stock