Dryer drum did not turn

ApplianceKenmore Dryer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Andrew From Bradford, NH

Jun 14, 2010

0 out of 1 people found this instruction helpful

Remove the lint screen from the top of the dryer, then remove the two philips head screws holding the lint screen channel on the dryer top. Use a large flat screwdriver to to pry up the from edge of the top of the dryer... this releases two clips just inside the top to edges of the dryer top from the dryer front. Lift the dryer top and support it back away from the front. Separate the wiring connector at the top right front for the door sensor. Use a nut driver to remove the top screws on the left and right just inside the top of the dryer. With these two screws out, lift up on the from of the dryer and remove it, setting it aside. Support the from of the drum from falling forward. The broken belt is then removed. Install the new belt using the instructions that come with it, paying close attention to the belt tensioner orientation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$14.08
In Stock