Bad bearings and support arm

ApplianceMaytag Washer

ModelMAH7500

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

Susan From Whiteford, MD

Jun 12, 2010

12 out of 13 people found this instruction helpful

We took off the fornt and back of the machine and pulled out the outer tub...then pulled the rear and the front bearings...and the sleeve between...and the support arm...We had only thought we would replace the bearings, but there is a seal in the hub of the support arm that often goes wrong and causes the bearing problem...That appeared to be the case in this fix...so we are glad we chose to replace the arm too. Then we reassembled in reverse order and voila! The machine is as quiet as can be!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spinner Support and Seal Kit

Part Number: PS1964673

$115.33
In Stock