broken bottom drawer glide and missing rivet on drawer front panel

ApplianceWhirlpool Range

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

David From Fairborn, OH

Jun 11, 2010

2 out of 3 people found this instruction helpful

Removed the old, broken drawer glide by removing the Phillips head screw. Then placed the new glide into place and fastened with the existing screw.

The rivet on the top of the bottom drawer front was missing. I lined up the drawer front with the supporting bracket behind it and inserted the rivet. All you have to do is tap the top of the pin in the center of the rivet to lock it in place. No rivet tool is needed. That should be explained in the parts listing because I bought the rivet tool before I realized I didn't need it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Rivet - White

Part Number: PS340434

$3.82
In Stock

Rear Drawer Glide

Part Number: PS388511

$3.76
In Stock