coating (clear) on ice cube mold peeling off

ApplianceKenmore Ice Maker

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Matthew From Collegeville, PA

Jun 09, 2010

2 out of 3 people found this instruction helpful

Removed ice maker from fridge. Removed motor assembly (3) screws on cover, and (2) screws inside. Removed mold (3 screws on bottom) and replaced everything in reverse order. Note: Turned ice maker off for several days while waiting for parts. The water line on this particular model will freeze inside the freezer if ice isn't made for several hours/days. You will have to defrost to begin making ice again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Cube Mold and Heater Assembly (Now subbed to Ice Mold)

Part Number: PS2341894

$67.84
In Stock

Icemaker Control Assembly

Part Number: PS2341896

$72.18
In Stock