Ice Maker would not eject the Ice either by cube or crushed

ApplianceWhirlpool Refrigerator

Model

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Screw drivers

Jack From College Station, TX

May 21, 2010

28 out of 45 people found this instruction helpful

removed the Ice Tray, removed the cover that the motor is attached to, The biggest problem I had was getting the coupler off the drive shaft. It would not tightyen up and would not turn auger. I had to remove the unit and take a hack saw to cut the coupler off
The other problem I could not get the wireing harness unpluged from the refigrator, and had to remove each individual wire from its contact. I had to remove the whole motor unit inorder to get the old coupler off.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Dispenser Kit Motor - 120V 60Hz

Part Number: PS328601

$120.73
In Stock

Ice Dispenser Motor Coupling

Part Number: PS2329394

$9.73
In Stock