The shaft of the original Temp Selector switch was snapped off during moving.

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Howard From Davis, CA

May 20, 2010

2 out of 2 people found this instruction helpful

Just remove the 2 screws out of the 4 that are on the top ends of the Control Panel. (Unplug first!)

Then lay the panel forward, remove the 1 screw holding in the temp switch, and put in the new switch.

Transfer the 4 wires (fast-ons) from the old switch to the new, and put the panel back in place, reinstall the 2 screws. Finished. Plug in & test the different settings for the correct water temp coming in throught the inlet.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Temperature Switch

Part Number: PS2017535

No Longer Available