fan switch would not work the fan

ApplianceJenn-Air Range


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Carri From Pittsburgh, PA

May 15, 2010

3 out of 4 people found this instruction helpful

Unplugged the unit first of course. Removed the control knobs.

Removed 4 screws from the control panel on the side of the stove top.

located the fan switch and took out the two connectors. The only little problem was the little bolt that holds the fan switch in place was slightly the wrong size for the new fan switch. I had to go to the hardware store to find a bolt that would hold the switch in place within the unit.

after that was located it was very simple to plug the connectors in to the new switch and put everything back in place. If a bolt would have been included it would have been a 10 or 15 minute job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Fan Control Switch (Now subbed to SWITCH-FAN)

Part Number: PS3632526

In Stock