Both the 8'' burner and the vent fan didn't work.

ApplianceJenn-Air Range

ModelC202

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers
Wrench(Adjustable)

Walter From N. Richland Hills, TX

May 11, 2010

4 out of 8 people found this instruction helpful

1st-turned off breaker, 2nd- took out the two screws that hold the control panel and lifted it up so I could remove the surface unit switch,3rd- removed wires from old switch and securing nut and removed old switch,4th- installed new switch and plugged in wires, then turned on breaker to see if burner would work and it did. 5th-turned off breaker again and removed the wires from the fan switch and used nut driver to remove retainer nuts,6th-installed new fan switch and plugged in wires, 7th- put control console back in place and the two screws that hold it in place. Turned breaker back on and everything worked.Didn't use the burner receptacle or burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Surface Burner Receptacle Kit

Part Number: PS1570190

$11.19
In Stock

Rocker Switch - White

Part Number: PS2005746

No Longer Available

Surface Unit Infinite Switch Kit

Part Number: PS2076107

$49.90
In Stock

Surface Element - 8"

Part Number: PS2195246

$26.84
In Stock