Had a leak at the top of one of the valve

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers
Wrench(Adjustable)

Paul From Winnetka, CA

May 07, 2010

4 out of 5 people found this instruction helpful

Ordered the new part from Part Select had very prompt shipment (2 days) printed out someone elses review and followed their steps and it was even easier than they had written so if you get this part simply print the only other "steps" listed because their correct. The only addition i would say is you can use a "nut driver" for the screws as well as the hose clamp which makes it simpler, and definitely mark where you remove the connections so they go back in the same location. Also it may be advisable to remove the big "drum cover" to get easier access to the water hose since it's a little short and difficult to get back on the new valve through the inlet valve hole.It should take you about 15 min to do

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Thermistor

Part Number: PS2021369

$59.11
In Stock