My dog tried to get to a pizza box that was sitting on the range. He managed to turn on the burner under the box in the process and set the cooktop on fire, burning the oven control overlay and two front knobs.

ApplianceGeneral Electric Range

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Wrench set
Pliers
Screw drivers

Diane From Redmond, WA

May 07, 2010

5 out of 7 people found this instruction helpful

The knobs were easy, just pull off and push on. The overlay was more challenging. I used pliers to loosen the two nuts that slip into slots on the back of the top of the range. Took out the two allen screws on the bottom of the range back panel just above the cooking surface. I could then pull out the control panel section. I removed the four screws holding the computer board to the top panel to get to the overlay. The old overlay peeled off easily. I removed the back paper from the new overlay and put it in place. I then removed the top protective film once the overlay was in place. Then it was just a matter of re-assembling and testing to see if it worked. Remember to unplug the range before starting to pull it apart. My range now looks as good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

OVERLAY T09-B

Part Number: PS2321432

$12.16
In Stock

Mini Valve Knob (Now subbed to Burner Knob - Stainless)

Part Number: PS3486486

$24.57
In Stock