Washer shaking during spin cycle and load noise when during agitation

ApplianceMaytag Washer


Level of DifficultyReally easy

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Socket set

Eric From Allenton, MI

May 06, 2010

2 out of 3 people found this instruction helpful

Removed front and rear panels, removed belt, removed old springs, disconnected bleach and pump lines from tub and lifted entire tub/transmission assmebly from washer. Replaced snubber ring at bottom of transmission assembly by backing off screws just enough to allow old ring to be removed and new one to be installed. Replaced pump assembly by removing drain hose and three bolts. Installed in reverse order. Placed tub/trans assembly back into washer and installed new springs using vise grip pliers. Reconnected bleach line and pump lines to tub. Reinstalled fron and rear panels. Installed new belt on bottom side of washer. Piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Snubber Ring

Part Number: PS1792928

In Stock

Suspension Spring

Part Number: PS2017965

In Stock

Drive Belt

Part Number: PS2021071

In Stock

Drain Pump with Pulley

Part Number: PS2347187

In Stock