rear drum rollers wore to the point of high pitch noise

ApplianceMaytag Dryer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

Robert From Pink Hill, NC

Apr 23, 2010

0 out of 1 people found this instruction helpful

Pulled belt off of motor,then laid dryer on back side to take screws holding front panel loose. Once front panel was off, took other front piece loose,then drum out of housing.Removed heating element with removal of two screws. Removed back panel that has roller assembly on and replace roller kit. Reinstall heating element.Took new belt and tape to drum in three different places where the old belt traveled ( just follow the path of the old belt on drum).Reinstall dryer at upright position after assembly is complete on front. Return to back of dryer and reinstall belt.Slowly turn belt to remove tape from drum and belt. .

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Support Roller Kit

Part Number: PS1570070

$19.73
In Stock

Front Glide Kit

Part Number: PS1804752

$12.51
In Stock

Tumbler and Motor Belt

Part Number: PS2200550

$16.24
In Stock

Roller Shaft

Part Number: PS2347258

$5.94
In Stock