During cold cycle, washer would remain in spin cycle

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

William From Neenah, WI

Apr 22, 2010

0 out of 1 people found this instruction helpful

I took the back plate off, which consisted of 3 phillips screws and 2 hex head screws. Than I removed 2 plugs; one from washer timer and one to the board that is clipped on the back of the washer timer. The washer timer has to be slid a little to the right, if your facing the back of the machine, than pulled up. It came out rather easy.
I put the new washer timer in, back tracing how I had removed it and ran 5 loads of colored wash with no problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS2021083

In Stock