dishwasher would not fill with water.

ApplianceMaytag Dishwasher

Modelwc202

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Nutdriver
Screw drivers
Wrench(Adjustable)

Robert From Rochester, MN

Apr 22, 2010

1 out of 2 people found this instruction helpful

I removed access panle then disconected the wires, water inlet line, and water outlet line from the valve. then took the two screws that held the valve in place off and removed the old valve and replaced with the new. Its that easy. I had one problem that did'nt want to stop haunting me...water leaks at the conections. Tip: don't put access panle on untill sure there are no leaks. You might notice I had an earlier article with a float switch. It turns out that that was not the problem. This water valve was, and it works great again. Not bad for 24yrs old(yes, the dishwasher).

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dual Water Inlet Valve

Part Number: PS2097024

$75.09
In Stock