buttons on front panel of microwave would not work

ApplianceGeneral Electric Microwave

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Zach From Nampa, ID

Apr 18, 2010

7 out of 8 people found this instruction helpful

Unplug the microwave unit from power source. I removed the air vent from the microwave that is located at the top of the microwave. Next I unscrewed the control panel that was held by one screw towards the top of the microwave. The panel then needs pushed upward to release from main microwave chasis. Gently remove control panel. Unplug the 3 main communication lines and the 1power line from the PCB. Pull up on ribbon cable slot in order to release pressure from the ribbon cable. Pull from the sides of the ribbon cable slot. Then the cable can be removed. You will then remove the 4 screws holding the PCB to the control panel and release the 2 hinges holding the board in place. Put PCB back together on new control assymbly. Plug in new ribbon cable, communication cables, and power cable back into the PCB. Put rest of microwave back together and test out. All went well with mine thank goodness. I am a technician at trade so it was easy for me to know how and what to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel - Black/Stainless

Part Number: PS2322068

$180.25
In Stock