Drive coupling worn out

ApplianceKitchenAid Small Appliance

Modelblender

Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

PETER From KINGSTON, MA

Apr 09, 2010

0 out of 2 people found this instruction helpful

Kitchen aid recomended "prying" the coupling off. . This is also a "left hand thread,( turn to the left to screw on )" need to pay attention there. Using a hammer and a screw driver you have to turn the drive wheel to the "right" acouple of sharp blows with the hammer and screw driver will loosen the gear off of the shaft. Remove gear and install the new one. Off you go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Coupling

Part Number: PS401661

$7.82
In Stock