Lower baking element would not heat up.

ApplianceTappan Range


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Jim From Harrison, MI

Apr 02, 2010

7 out of 13 people found this instruction helpful

Your online instructions said to remove the two screws and pull out the heating element about 3 inches and disconnect. When I did this the element came out but not where it was connect to the wire., I could not locate the wire from the front of the oven. I then pulled out the oven from the built in cabinet and removed the rear panel. Then inserted the element with the 2 screws from the front and connect the wires to the element from the back of the oven. Jim

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - Push On Terminals - 240V

Part Number: PS2332301

In Stock

Light Bulb Lens

Part Number: PS2349721

In Stock