Upper and Lower Fill Injector snapped off and water was leaking out of the back of the machine

ApplianceMaytag Washer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Daryl From Newton, NJ

Mar 30, 2010

1 out of 2 people found this instruction helpful

I looked at the machine diagram on the website and removed the screw on the bottom and lifted up the from panel which allowed me to have easier access to the fill injector. Then I removed the back panel off of the control panel on the top of the machine and removed the screw that held the fill injector in place, attached the new fill injector using the hose clamp I ordered with the part ( you need a new hose clamp because the other one is useless after you remove the old injector). Tightend up the screw to hold the injector in place and replaced the back panel and front panel. It was an easy repair and only cost $28.00 with shipping. I easily saved $150.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Hose Clamp

Part Number: PS380193

$2.70
In Stock

Lower Fill Injector

Part Number: PS2019426

$22.18
In Stock

Upper Fill Injector

Part Number: PS2019427

$22.36
In Stock