Replaced old black with new ss door panel

ApplianceMaytag Dishwasher


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Patricia From Saint Louis, MO

Mar 25, 2010

4 out of 4 people found this instruction helpful

Difficulty was primarily because there were no instructions for the procedure so trial and error. I suggest: 1) Turn off power circut to the dishwasher. Then remove the star headed screws on the panel with door open and this separates the interior plastic door liner from the exterior door panel 2) remove the 4 screws inside the door that are the final fasteners for the exterior panel and the metal brace 3) bottom of the old door panel is curled and needs to be bent back slightly at the bottom 2 corners with a screw driver or pliers so the old panel can be removed by sliding the panel upward past corner brace while being careful with the electrical connections 4) once the old panel is removed the new one can be slid down the door arms and the interior screws attached 5) finally install the star head screws holding the interior panel and the new exterior panel. Restore electrical power and enjoy the new look of the ss panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Exterior Door Panel

Part Number: PS2340942

In Stock