Dryer would not heat

ApplianceWhirlpool Dryer

ModelPS334313

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Pliers
Nutdriver

David From Lawrenceville, GA

Mar 24, 2010

0 out of 1 people found this instruction helpful

Very simple. First step was to unplug the dryer. The I removed the 10 or so screws of the back panel. Located the heating element on the lower right side of dryer. Detached the electrical wiring to the heating element. Removed the 4 screws that held it in place. Easily pulled the old heating element. Moved the electronic switch from the old heating element to the new one. Placed the new element back into place with its 4 screws. Reattached the electrical wiring. Placed the back panel on. Ready to go. Quite an easy job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Heating Element - 240V 5400W

Part Number: PS334313

$55.29
In Stock