Ice tray coating flaking off into ice.

ApplianceWhirlpool Ice Maker

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

William From Las Vegas, NV

Mar 23, 2010

1 out of 3 people found this instruction helpful

Removal of the Ice Maker required the removal of only one screw from underneath the maker and the power connector disconnect. Dis-assembly was straight forward. Remove old tray and heater, and reassemble with new tray and heater unit. Reinstall Ice Maker! Special Note: Allow the Ice Maker time to cycle through it's sequences. It may take a period of time before it starts producing ice after re-installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Cube Mold and Heater Assembly (Now subbed to Ice Mold)

Part Number: PS2341894

$82.93
In Stock