Not making Ice. Frozen inlet line. Had flakes in ice prior to freezing.

ApplianceAmana Refrigerator

ModelSZD20MW

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver

John From Palmyra, NY

Mar 21, 2010

0 out of 1 people found this instruction helpful

Removed power and loosened two top screws on ice maker. Then I removed bottom screw and lifted of the top screws and pivoted ice maker to remove the power plug. I then swapped the white cover and the arm which turns off the ice maker when full from the old unit. I also had to trim some plastic off of the water trough where the hose goes into the ice maker. It was already scribed, so all I did was bend back and forth until the piece came out. I also replaced the inlet valve by shutting off the water supply and removing the three lines from it. I then removed the two mounting screws that held it in. I had to swap the old bracket onto the new valve. While i had the back of the refrigerator open, I cleaned the entire inside. It took longer to clean than to do the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Replacement Ice Maker

Part Number: PS2121513

$107.31
In Stock

Ice Maker Water Inlet Valve (Now subbed to Water Inlet Valve)

Part Number: PS2377030

$63.21
In Stock