Repair stories from PartSelect's customers - like you. We give all our customers a chance to help out others by sharing the story of their appliance repair. You can find useful tips as well as estimates of the difficulty of the repair and how long it will take, along with any tools you may require to complete your repair.
|
Visitor Rating
|
|
Dryer belt broke- drum would not turn
|
|
|
Overall Rating:
Very Helpful
Rated By:
4 Customers
Posted By:
Ronald From Oakdale, CT
Posted:
7/6/2007 5:59:51 PM
|
|
|
Appliance Repaired:
|
Admiral
Dryer
|
|
|
|
|
Age Of Appliance:
|
1 - 4 years
|
This was so much easier than I though it was going to be. Pulled up on the top part of the dryer and folded it over to the back. Removed 2 screws for the front panel and disconnected some wires. Laying down I fed the new belt on and made sure the tensioner was put back into the right spot, because when the belt broke the tensioner sprung to the other end of its travel. Put everything back together. This was made super easy because you guys had the parts and the shipping was super fast. Alot of the local shops in the area didnt even carry the belt or were not helpful..
|
| Parts Used: |
|
| Level of difficulty: |
Easy |
| Time to do repair: |
30 - 60 mins |
|
|
|
|
|
|
Parts Used in this Repair
|
Repair stories are provided by PartSelect customers and are not intended to replace an on-site diagnosis or advice from a qualified appliance service technician. Difficulty of repair and time to repair may vary based on experience.
See the index of all our appliance repair stories.