Clock/Temperture LED grew gradually dimmer

ApplianceJenn-Air Range

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Mark From Lincoln, NE

Mar 11, 2010

0 out of 1 people found this instruction helpful

It's a very simple repair. After turning off the power at the circuit breaker panel, remove the 4 sheetmetal screws under the control panel with a nut driver. Pull the panel down slightly to remove it from the front of the range and hang the panel on the tabs on the front of the inner framework (into slots on the bottom of the panel. Remove the two pin connectors and the ribbon connector (procedure is self-evident when you see the parts). Remove the old display (two screws) and replace it with the new display. Reconnect fasteners and reassemble. Took maybe 5 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Control Board

Part Number: PS2077361

$304.75
Recycling Rebate Available
In Stock