Level of DifficultyEasy
Time to do repair1- 2 hours
Age of Appliance5 - 10 years
Stanley From Santa Clarita, AL
Mar 07, 2010
1 out of 3 people found this instruction helpful
Removed bolt from agitator assembly. Pulled up on the agitator vane and removed it.
tipped over macvhine . Drained water from tub via the drain hose assemble and removed clips from the hoses to the pump atached to the motor and drained residual water from the lines. Removed the electrical connector attached to the motor assembly and the three bolts holding the motor assembly and shaft to the tub and slid the shaft and assembry out.. Took digital photo of the assembly to insure proper part replacement and removed the clips and spring that are part of the assembly that holds on the clutch. Removed the old assembly and installed the new assembly . Installed the spring and retaining clip that came with the kit and installed the shaft . Installed the three bolts holding the/motor assembly and shaft in place and reconnected the hoses to the pump assembly and reconnected the electrical connector. Uprighted the washer and everything worked like new when I tested the spin cycle. I was quoted $225 to fix the bad clutch from the appliance tech that I paid $20 to diagnose the problem . Saved about $175 by doing it my self and it wasn't hard to do. My thanks to the previous persons that had done the repair and left iinstructions on how to do it.
SW Santa Clarita Ca.
|Part Photo||Part Description||Price||Availability
Part Number: PS334641