Small amout of water on floor near front of washing machine

ApplianceWhirlpool Washer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Jesse From Richardson, TX

Feb 28, 2010

0 out of 1 people found this instruction helpful

Turned water off at wall and disconnected electrical power cord from outlet.

Tilted washer backward far enough to view water pump and bottom of tub, motor, etc.. Saw drip of water on one of the two clamps that secure the pump on shaft.

Removed the two hoses that are connected to pump (drained water in a pan). Using screw driver, removed the two clamps that hold the pump on the shaft. Wet, greasy shaft allowed pump to slip off easily.

Installed large hose onto new pump, then put new pump onto shaft...then aligned four pump legs in place, then snapped the two clamps on to secure pump in place on shaft.

Installed second hose.

Kim, ar PartSelect.com was great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Water Pump

Part Number: PS342434

$29.85
In Stock